# Device Status

What each device status in Device MCP means, and how to fix a device that isn't ready.

When a device isn't ready, Device MCP names the problem in the sidebar and shows the fix. Once you fix it, Device MCP continues on its own. Most of the time you don't need to click anything.

## 1. Status dots

| Dot | Meaning |
| --- | --- |
| 🟢 Green | **Live**: the device is mirroring. |
| 🟡 Yellow | **Connecting**. |
| 🟠 Orange | The device needs your attention. See below. |
| 🔴 Red | Device MCP can't connect. |
| ⚪️ Gray | Not mirrored. |

## 2. Not Trusted

The device doesn't trust this Mac yet.

1. Unlock the device.
2. Tap **Trust** and enter your passcode.
3. No prompt? Unplug the cable and plug it in again.

## 3. Locked

The device is locked. Unlock it, and mirroring starts.

## 4. Developer Mode Off

1. On the device, open **Settings → Privacy & Security → Developer Mode**.
2. Turn it on and restart the device.
3. After the restart, unlock it and tap **Turn On**.

{% hint style="info" %}
Can't find **Developer Mode** in Settings? Click **Show Developer Mode in Settings** in Device MCP, and it appears on the device.
{% endhint %}

## 5. iOS Not Supported

Device MCP works with iOS 27 and iPadOS 27 or later. Update the device in **Settings → General → Software Update**.

If the device runs an iOS version newer than Device MCP knows, click **Check for Updates…** to get the latest Device MCP, or **Try Anyway**.

## 6. Can't Connect

1. Unplug the device and plug it in again, or click **Reconnect**.
2. Over Wi-Fi, connect the cable to get going again.
3. Still stuck? Restart the device.

If connecting takes longer than usual, Device MCP shows **Reconnect** so you can try again right away.